Insert the SIM card and battery
Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a
micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure)
in this device. A micro SIM card is smaller than the standard SIM card. This device does
not support the use of micro-SIM cards and use of incompatible SIM cards may damage
the card or the device, and may corrupt data stored on the card.
Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
Get started
9
1 To open the back cover of the device, with the back facing you, unlock the back
cover release latch, and lift the back cover.
2 If the battery is inserted, lift the battery in the direction of the arrow to remove it.
3 Insert the SIM card. Ensure the contact area on the card is facing the connectors on
the device and that the bevelled corner is facing the bottom of the device.
4 Align the contacts of the battery with the corresponding connectors on the battery
compartment, and insert the battery in the direction of the arrow.
5 To replace the back cover, direct the top locking catches toward their slots, and
press down until the cover locks into place.
10 Get started